FANDOM


Conversion of units refers to conversion factors between different units of measurement for the same quantity.

TechniquesEdit

Rounding of results Edit

The process of making a conversion cannot produce a more precise result than the original quoted figure. Appropriate rounding of results is normally performed after conversion. (See significant figures).

Multiplication Factors Edit

Conversion between units in the metric (SI) system can be discerned by their prefixes (for example, 1 kilogram = 1000 grams, 1 milligram = 0.001 grams) and are thus not listed in this article. Exceptions are made if the unit is commonly known by another name (for example, 1 micron = 10−6 metre). For a full listing of multiplication factors, see SI prefix.

Table Ordering Edit

Within each table, the units are listed alphabetically, and the SI units (base or derived) are highlighted.

Tables of conversion factors Edit

This article gives lists of conversion factors for each of a number of physical quantities, which are listed in the index. For each physical quantity, a number of different units (some only of historical interest) are shown and expressed in terms of the corresponding SI unit.

Legend
Symbol Definition
exactly equal to
approximately equal to
digits indicates that digits repeat infinitely (e.g. 8.294 369 corresponds to 8.294 369 369 369 369…)
(H) of chiefly historical interest

LengthEdit

Length
Name of unit Symbol Definition Relation to SI units
ångström Å ≡ 1×10−10 m = 0.1 nm
astronomical unit AU ≈ Distance from Earth to Sun 149 597 871 464 m [1]
barleycorn (H)   ≡ ⅓ in (see note above about rounding) = 8.46×10-3 m
bohr, atomic unit of length a0 Bohr radius of hydrogen 5.291 772 0859×10−11 ± 3.6×10−20 m [2]
cable length (Imperial)   ≡ 608 ft = 185.3184 m
cable length (International)   ≡ 1/10 nmi = 185.2 m
cable length (U.S.)   ≡ 720 ft = 219.456 m
chain (Gunter's; Surveyor's) ch ≡ 66 ft ≡ 4 rods [3] = 20.1168 m
cubit (H)   ≡ Distance from fingers to elbow ≈ 18in ≈ 0.5 m
ell (H) ell ≡ 45 in [3] = 1.143 m
fathom fm ≡ 6 ft [3] = 1.8288 m
fermi fm ≡ 1×10−15 m [3] = 1×10−15 m
finger   ≡ 7/8 in = 0.022 225 m
finger (cloth)   ≡ 4½ in = 0.1143 m
foot (Benoît) (H) ft (Ben) 0.304 799 735 m
foot (Clarke's; Cape) (H) ft (Cla) 0.304 797 2654 m
foot (Indian) (H) ft Ind 0.304 799 514 m
foot (International) ft ≡ ⅓ yd = 12 inches = 0.3048 m
foot (Sear's) (H) ft (Sear) 0.304 799 47 m
foot (U.S. Survey) ft (US) 1 200/3 937 m [4] 0.304 800 610 m
french; charriere F ≡ ⅓ mm = 3.3×10−4 m
furlong fur ≡ 10 chains = 660 ft = 220 yd [3] = 201.168 m
hand   ≡ 4 in [3] = 0.1016 m
inch in ≡ 1/36 yd = 1/12 ft = 0.0254 m
league (land) lea ≡ 3 US Statute miles [5] = 4 828.032 m
light-day   ≡ 24 light-hours = 2.590 206 837 12×1013 m
light-hour   ≡ 60 light-minutes = 1.079 252 8488×1012 m
light-minute   ≡ 60 light-seconds = 1.798 754 748×1010 m
light-second   ≡ Distance light travels in one second in vacuum = 2.997 924 58×108 m
light-year l.y. ≡ Distance light travels in vacuum in 365.25 days [6] = 9.460 730 472 5808×1015 m
line ln ≡ 1/12 in [7] = 0.002 116 m
link (Gunter's; Surveyor's) lnk ≡ 1/100 ch [3] = 0.201 168 m
link (Ramsden's; Engineer's) lnk ≡ 1 ft [3] = 0.3048 m
metre (SI base unit) m ≡ Distance light travels in 1/299 792 458 of a second in vacuum.[8] = 1 m
mickey   ≡ 1/200 in = 1.27×10−4 m
micron µ ≡ 1×10−6 m
mil; thou mil ≡ 1×10−3 in = 2.54×10−5 m
mil (Sweden and Norway) mil ≡ 10 km = 10 000 m
mile mi 1 760 yd = 5 280 ft = 80 chains = 1 609.344 m
mile (geographical) (H) 6 082 ft = 1 853.7936 m
mile (telegraph) (H) mi 6 087 ft = 1 855.3176 m
mile (U.S. Survey) mi 5 280 ft (US Survey feet) = 5 280 × 1 200/3 937 m ≈ 1 609.347 219 m
nail (cloth)   ≡ 2¼ in [3] = 0.057 15 m
nautical league NL; nl ≡ 3 nmi [3] = 5 556 m
nautical mile (international) NM; nmi 1 852 m [9] = 1 852 m
nautical mile (Admiralty) NM (Adm); nmi (Adm) 6 080 ft 1 853.184 m
pace   ≡ 2.5 ft [3] = 0.762 m
palm   ≡ 3 in [3] = 0.0762 m
parsec pc Distance of star with parallax shift of one arc second from a base of one astronomical unit 3.085 677 82×1016 ± 6×106 m [10]
pica   ≡ 12 points Dependent on point measures.
point (American, English) [11][12] pt ≡ 1/72.272 in 0.000 351 450 m
point (Didot; European) [12][13] pt ≡ 1/12 × 1/72 of pied du roi;

After 1878:
≡ 5/133 cm
0.000 375 97 m;

After 1878:
0.000 375 939 85 m
point (PostScript) [11] pt ≡ 1/72 in = 0.000 352 7 m
point (TeX) [11] pt ≡ 1/72.27 in = 0.000 351 4598 m
quarter   ≡ ¼ yd = 0.2286 m
rod; pole; perch (H) rd ≡ 16½ ft = 5.0292 m
rope (H) rope ≡ 20 ft [3] = 6.096 m
span (H)   ≡ 9 in [3] = 0.2286 m
spat [14] ≡ 1×1012 m
stick (H)   ≡ 2 in = 0.0508 m
stigma; bicron (picometre) pm ≡ 1×10−12 m
twip twp 1/1 440 in = 1.7638×10−5 m
x unit; siegbahn xu ≈ 1.0021×10−13 m [3]
yard (International) yd ≡ 0.9144 m [15] ≡ 3 ft ≡ 36 in ≡ 0.9144 m

AreaEdit

Area
Name of unit Symbol Definition Relation to SI units
acre (international) ac ≡ 10 sq ch = 4 840 sq yd = 4 046.856 4224 m2
acre (U. S. survey) ac ≡ 10 sq ch = 4 840 sq yd = 4 046.873 m2 [16]
are a ≡ 100 m2 = 100 m2
barn b ≡ 10−28 m2 = 10−28 m2
barony   4 000 ac = 1.618 742 568 96×107 m2
board bd ≡ 1 in × 1 ft = 7.741 92×10−3 m2
boiler horsepower equivalent direct radiation bhp EDR ≡ (1 ft2) (1 bhp) / (240 BTUIT/h) 12.958 174 m2
circular inch circ in ≡ π/4 sq in 5.067 075×10−4 m2
circular mil; circular thou circ mil ≡ π/4 mil2 5.067 075×10−10 m2
cord   ≡ 192 bd = 1.486 448 64 m2
dunam   1 000 m2 = 1 000 m2
hectare ha 10 000 m2 = 10 000 m2
hide   ≡ 100 ac = 4.046 856 4224×105 m2
rood ro ≡ ¼ ac = 1 011.714 1056 m2
shed   ≡ 10−52 m2 = 10−52 m2
square chain sq ch ≡ 1/10 ac = 404.685 642 24 m2
square foot sq ft ≡ 1 ft × 1 ft = 9.290 304×10−2 m2
square foot (U.S. Survey) sq ft ≡ 1 ft (US) × 1 ft (US) 9.290 341 161 327 49×10-2 m2
square inch sq in ≡ 1 in × 1 in = 6.4516×10−4 m2
square kilometre km2 ≡ 1 km × 1 km = 106 m2
square link sq lnk ≡ 1 lnk × 1 lnk = 4.046 856 4224×10−2 m2
square metre (SI unit) m2 ≡ 1 m × 1 m = 1 m2
square mil; square thou sq mil ≡ 1 mil × 1 mil = 6.4516×10−10 m2
square mile; section sq mi ≡ 1 mi × 1 mi = 2.589 988 110 336×106 m2
square mile (U.S. Survey) sq mi ≡ 1 mi (US) × 1 mi (US) 2.589 998×106 m2
square rod/pole/perch sq rd ≡ 1 rd × 1 rd = 25.292 852 64 m2
square yard sq yd ≡ 1 yd × 1 yd = 0.836 127 36 m2
stremma   1 000 m2 = 1 000 m2
township   ≡ 36 sq mi (US) 9.323 994×107 m2
yardland   ≡ 30 ac = 1.214 056 926 72×105 m2

VolumeEdit

Volume
Name of unit Symbol Definition Relation to SI units
acre-foot ac ft ≡ 1 ac x 1 ft = 43 560 ft3 = 1 233.481 837 547 52 m3
acre-inch   ≡ 1 ac × 1 in = 102.790 153 128 96 m3
barrel (Imperial) bl (Imp) ≡ 36 gal (Imp) = 0.163 659 24 m3
barrel (petroleum) bl; bbl ≡ 42 gal (US) = 0.158 987 294 928 m3
barrel (U.S. dry) bl (US) ≡ 105 qt (US) = 105/32 bu (US lvl) = 0.115 628 198 985 075 m3
barrel (U.S. fluid) fl bl (US) ≡ 31½ gal (US) = 0.119 240 471 196 m3
board-foot fbm ≡ 144 cu in = 2.359 737 216×10−3 m3
bucket (Imperial) bkt ≡ 4 gal (Imp) = 0.018 184 36 m3
bushel (Imperial) bu (Imp) ≡ 8 gal (Imp) = 0.036 368 72 m3
bushel (U.S. dry heaped) bu (US) ≡ 1 ¼ bu (US lvl) = 0.044 048 837 7086 m3
bushel (U.S. dry level) bu (US lvl) ≡ 2 150.42 cu in = 0.035 239 070 166 88 m3
butt, pipe   ≡ 126 gal (wine) = 0.476 961 884 784 m3
coomb   ≡ 4 bu (Imp) = 0.145 474 88 m3
cord (firewood)   ≡ 8 ft × 4 ft × 4 ft = 3.624 556 363 776 m3
cord-foot   ≡ 16 cu ft = 0.453 069 545 472 m3
cubic fathom cu fm ≡ 1 fm × 1 fm × 1 fm = 6.116 438 863 872 m3
cubic foot cu ft ≡ 1 ft × 1 ft × 1 ft = 0.028 316 846 592 m3
cubic inch cu in ≡ 1 in × 1 in × 1 in = 16.387 064×10−6 m3
cubic metre (SI unit) m3 ≡ 1 m × 1 m × 1 m = 1 m3
cubic mile cu mi ≡ 1 mi × 1 mi × 1 mi = 4 168 181 825.440 579 584 m3
cubic yard cu yd ≡ 27 cu ft = 0.764 554 857 984 m3
cup (breakfast)   ≡ 10 fl oz (Imp) = 284.130 625×10−6 m3
cup (Canadian) c (CA) ≡ 8 fl oz (Imp) = 227.3045×10−6 m3
cup (metric) c ≡ 250.0×10−6 m3 = 250.0×10−6 m3
cup (U.S. customary) c (US) ≡ 8 US fl oz ≡ 1/16 gal (US) = 236.588 2365×10−6 m3
cup (U.S. food nutrition labeling) c (US) ≡ 240 mL[17] = 2.4×10−4
 m3
dash (Imperial)   ≡ 1/384 gi (Imp) = ½ pinch (Imp) = 369.961 751 302 08 3×10−9 m3
dash (U.S.)   ≡ 1/96 US fl oz = ½ US pinch = 308.057 599 609 375×10−9 m3
dessertspoon (Imperial)   ≡ 1/12 gi (Imp) = 11.838 776 0416×10−6 m3
drop (Imperial) gtt ≡ 1/288 fl oz (Imp) = 98.656 467 013 8×10−9 m3
drop (Imperial) (alt) gtt 1/1 824 gi (Imp) 77.886 684×10−9 m3
drop (medical)   ≡ 1/12 ml = 83.03×10−9 m3
drop (metric)   ≡ 1/20 mL = 50.0×10−9 m3
drop (U.S.) gtt ≡ 1/360 US fl oz = 82.148 693 22916×10−9 m3
drop (U.S.) (alt) gtt ≡ 1/456 US fl oz 64.854 231×10−9 m3
fifth   ≡ 1/5 US gal = 757.082 3568×10−6 m3
firkin   ≡ 9 gal (US) = 0.034 068 706 056 m3
fluid drachm (Imperial) fl dr ≡ ⅛ fl oz (Imp) = 3.551 632 8125×10−6 m3
fluid dram (U.S.); U.S. fluidram fl dr ≡ ⅛ US fl oz = 3.696 691 195 3125×10−6 m3
fluid ounce (Imperial) fl oz (Imp) ≡ 1/160 gal (Imp) = 28.413 0625×10−6 m3
fluid ounce (U.S. customary) US fl oz ≡ 1/128 gal (US) = 29.573 529 5625×10−6 m3
fluid ounce (U.S. food nutrition labeling) US fl oz ≡ 30 mL[17] = 3×10−5
 m3
fluid scruple (Imperial) fl s ≡ 1/24 fl oz (Imp) = 1.183 877 60416×10−6 m3
gallon (beer) beer gal ≡ 282 cu in = 4.621 152 048×10−3 m3
gallon (Imperial) gal (Imp) 4.546  09 L = 4.546 09×10−3 m3
gallon (U.S. dry) gal (US) ≡ ⅛ bu (US lvl) = 4.404 883 770 86×10−3 m3
gallon (U.S. fluid; Wine) gal (US) ≡ 231 cu in = 3.785 411 784×10−3 m3
gill (Imperial); Noggin gi (Imp); nog ≡ 5 fl oz (Imp) = 142.065 3125×10−6 m3
gill (U.S.) gi (US) ≡ 4 US fl oz = 118.294 118 25×10−6 m3
hogshead (Imperial) hhd (Imp) ≡ 2 bl (Imp) = 0.327 318 48 m3
hogshead (U.S.) hhd (US) ≡ 2 fl bl (US) = 0.238 480 942 392 m3
jigger (bartending)   ≡ 1½ US fl oz ≈ 44.36×10−6 m3
kilderkin   ≡ 18 gal (Imp) = 0.081 829 62 m3
lambda λ ≡ 1 mm3 = 1×10−9 m3
last   ≡ 80 bu (Imp) = 2.909 4976 m3
litre L ≡ 1 dm3 [18] = 0.001 m3
load   ≡ 50 cu ft = 1.415 842 3296 m3
minim (Imperial) min ≡ 1/480 fl oz (Imp) = 1/60 fl dr (Imp) = 59.193 880 208 3×10−9 m3
minim (U.S.) min ≡ 1/480 US fl oz = 1/60 US fl dr = 61.611 519 921 875×10−9 m3
peck (Imperial) pk ≡ 2 gal (Imp) = 9.092 18×10−3 m3
peck (U.S. dry) pk ≡ ¼ US lvl bu = 8.809 767 541 72×10−3 m3
perch per ≡ 16½ ft × 1½ ft × 1 ft = 0.700 841 953 152 m3
pinch (Imperial)   ≡ 1/192 gi (Imp) = ⅛ tsp (Imp) = 739.923 502 60416×10−9 m3
pinch (U.S.)   ≡ 1/48 US fl oz = ⅛ US tsp = 616.115 199 218 75×10−9 m3
pint (Imperial) pt (Imp) ≡ ⅛ gal (Imp) = 568.261 25×10−6 m3
pint (U.S. dry) pt (US dry) ≡ 1/64 bu (US lvl) ≡ ⅛ gal (US dry) = 550.610 471 3575×10−6 m3
pint (U.S. fluid) pt (US fl) ≡ ⅛ gal (US) = 473.176 473×10−6 m3
pony   ≡ 3/4 US fl oz = 22.180 147 171 875×10−6 m3
pottle; quartern   ≡ ½ gal (Imp) = 80 fl oz (Imp) = 2.273 045×10−3 m3
quart (Imperial) qt (Imp) ≡ ¼ gal (Imp) = 1.136 5225×10−3 m3
quart (U.S. dry) qt (US) ≡ 1/32 bu (US lvl) = ¼ gal (US dry) = 1.101 220 942 715×10−3 m3
quart (U.S. fluid) qt (US) ≡ ¼ gal (US fl) = 946.352 946×10−6 m3
quarter; pail   ≡ 8 bu (Imp) = 0.290 949 76 m3
register ton   ≡ 100 cu ft = 2.831 684 6592 m3
sack (Imperial); bag   ≡ 3 bu (Imp) = 0.109 106 16 m3
sack (U.S.)   ≡ 3 bu (US lvl) = 0.105 717 210 500 64 m3
seam   ≡ 8 bu (US lvl) = 0.281 912 561 335 04 m3
shot   ≡ 1 US fl oz ≈ 29.57×10−6 m3
strike (Imperial)   ≡ 2 bu (Imp) = 0.072 737 44 m3
strike (U.S.)   ≡ 2 bu (US lvl) = 0.070 478 140 333 76 m3
tablespoon (Canadian) tbsp ≡ ½ fl oz (Imp) = 14.206 531 25×10−6 m3
tablespoon (Imperial) tbsp ≡ 5/8 fl oz (Imp) = 17.758 164 0625×10−6 m3
tablespoon (metric)   ≡ 15.0×10−6 m3
tablespoon (U.S. customary) tbsp ≡ ½ US fl oz = 14.786 764 7825×10−6 m3
tablespoon (U.S. food nutrition labeling) tbsp ≡ 15 mL[17] = 1.5×10−5
 m3
teaspoon (Canadian) tsp ≡ 1/6 fl oz (Imp) = 4.735 510 416×10−6 m3
teaspoon (Imperial) tsp ≡ 1/24 gi (Imp) = 5.919 388 02083×10−6 m3
teaspoon (metric)   ≡ 5.0×10−6 m3 = 5.0×10−6 m3
teaspoon (U.S. customary) tsp ≡ 1/6 US fl oz = 4.928 921 595×10−6 m3
teaspoon (U.S. food nutrition labeling) tsp ≡ 5 mL[17] = 5×10−6
 m3
timber foot   ≡ 1 cu ft = 0.028 316 846 592 m3
ton (displacement)   ≡ 35 cu ft = 0.991 089 630 72 m3
ton (freight)   ≡ 40 cu ft = 1.132 673 863 68 m3
ton (water)   ≡ 28 bu (Imp) = 1.018 324 16 m3
tun   ≡ 252 gal (wine) = 0.953 923 769 568 m3
wey (U.S.)   ≡ 40 bu (US lvl) = 1.409 562 806 6752 m3

Plane angleEdit

Plane angle
Name of unit Symbol Definition Relation to SI units
angular mil µ 2π/6 400 rad 0.981 748×10-3 rad
arcminute ' ≡ 1°/60 0.290 888×10-3 rad
arcsecond " 1°/3 600 4.848 137×10-6 rad
centesimal minute of arc ' ≡ 1 grad/100 0.157 080×10-3 rad
centesimal second of arc " 1 grad/10 000 1.570 796×10-6 rad
degree (of arc) ° ≡ π/180 rad = 1/360 of a revolution 17.453 293×10-3 rad
grad; gradian; gon grad ≡ 2π/400 rad = 0.9° 15.707 963×10-3 rad
octant   ≡ 45° 0.785 398 rad
quadrant   ≡ 90° 1.570 796 rad
radian (SI unit) rad The angle subtended at the center of a circle by an arc whose length is equal to the circle's radius. One full revolution encompasses 2π radians. = 1 rad
sextant   ≡ 60° 1.047 198 rad
sign   ≡ 30° 0.523 599 rad

Solid angleEdit

Solid angle
Name of unit Symbol Definition Relation to SI units
steradian (SI unit) sr The solid angle subtended at the center of a sphere of radius r by a portion of the surface of the sphere having an area r2. A sphere encompasses 4π sr.[14] = 1 sr

MassEdit

Notes:

  • See Weight for detail of mass/weight distinction and conversion.
  • In this table, the unit gee is used to denote standard gravity in order to avoid confusion with the "g" symbol for grams.
Mass
Name of unit Symbol Definition Relation to SI units
atomic mass unit, unified u; AMU 1.660 538 73×10−27 ± 1.3×10−36 kg
atomic unit of mass, electron rest mass me 9.109 382 15×10−31 ± 45×10−39 kg [19]
bag (coffee)   ≡ 60 kg = 60 kg
bag (Portland cement)   ≡ 94 lb av = 42.637 682 78 kg
barge   ≡ 22½ sh tn = 20 411.656 65 kg
carat kt ≡ 3 1/6 gr 205.196 548 333 mg
carat (metric) ct ≡ 200 mg = 200 mg
clove   ≡ 8 lb av = 3.628 738 96 kg
crith   ≈ 89.9349 mg
dalton Da 1.660 902 10×10−27 ± 1.3×10−36 kg
dram (apothecary; troy) dr t ≡ 60 gr = 3.887 9346 g
dram (avoirdupois) dr av 27 11/32 gr = 1.771 845 195 3125 g
electronvolt eV ≡ 1 eV (energy unit) / c2 = 1.7826×10-36 kg
gamma γ ≡ 1 μg = 1 μg
grain gr 64.798 91 mg = 64.798 91 mg
hundredweight (long) long cwt or cwt ≡ 112 lb av = 50.802 345 44 kg
hundredweight (short); cental sh cwt ≡ 100 lb av = 45.359 237 kg
hyl (CGS unit)   ≡ 1 gee × 1 g × 1 s2/m = 9.806 65 g
hyl (MKS unit)   ≡ 1 gee × 1 kg × 1 s2/m = 9.806 65 kg
kilogram, grave kg; G (SI base unit)[8]
kip kip 1 000 lb av = 453.592 37 kg
mark   ≡ 8 oz t = 248.827 8144 g
mite   ≡ 1/20 gr = 3.239 9455 mg
mite (metric)   ≡ 1/20 g = 50 mg
ounce (apothecary; troy) oz t ≡ 1/12 lb t = 31.103 4768 g
ounce (avoirdupois) oz av ≡ 1/16 lb = 28.349 523 125 g
ounce (U.S. food nutrition labeling) oz ≡ 28 g[17] = 28 g
pennyweight dwt; pwt ≡ 1/20 oz t = 1.555 173 84 g
point   ≡ 1/100 ct = 2 mg
pound (avoirdupois) lb av 7 000 grains = 0.453 592 37 kg
pound (metric)   ≡ 500 g = 500 g
pound (troy) lb t 5 760 grains = 0.373 241 7216 kg
quarter (Imperial)   ≡ 1/4 long cwt = 2 st = 28 lb av = 12.700 586 36 kg
quarter (informal)   ≡ ¼ short tn = 226.796 185 kg
quarter, long (informal)   ≡ ¼ long tn = 254.011 7272 kg
quintal (metric) q ≡ 100 kg = 100 kg
scruple (apothecary) s ap ≡ 20 gr = 1.295 9782 g
sheet   ≡ 1/700 lb av = 647.9891 mg
slug; geepound slug ≡ 1 gee × 1 lb av × 1 s2/ft 14.593 903 kg
stone st ≡ 14 lb av = 6.350 293 18 kg
ton, assay (long) AT ≡ 1 mg × 1 long tn ÷ 1 oz t 32.666 667 g
ton, assay (short) AT ≡ 1 mg × 1 sh tn ÷ 1 oz t 29.166 667 g
ton, long long tn or ton 2 240 lb = 1 016.046 9088 kg
ton, short sh tn 2 000 lb = 907.184 74 kg
tonne (mts unit) t 1 000 kg = 1 000 kg
wey   ≡ 252 lb = 18 st = 114.305 277 24 kg (variants exist)
Zentner Ztr. Definitions vary; see [20] and [14]. See also discussion at Talk:Conversion of units#Zentner

In physics, the pound of mass is sometimes written lbm to distinguish it from the pound-force (lbf). It should not be read as the mongrel unit "pound metre".

Density Edit

Density
Name of unit Symbol Definition Relation to SI units
gram per millilitre g/mL ≡ g/mL = 1,000 kg/m3
kilogram per cubic metre (SI unit) kg/m3 ≡ kg/m3 = 1 kg/m3
kilogram per litre kg/L ≡ kg/L = 1,000 kg/m3
ounce (avoirdupois) per cubic foot oz/ft3 ≡ oz/ft3 1.001153961 kg/m3
ounce (avoirdupois) per cubic inch oz/in3 ≡ oz/in3 1.729994044×103
 kg/m3
ounce (avoirdupois) per gallon (Imperial) oz/gal ≡ oz/gal 6.236023291 kg/m3
ounce (avoirdupois) per gallon (U.S. fluid) oz/gal ≡ oz/gal 7.489151707 kg/m3
pound (avoirdupois) per cubic foot lb/ft3 ≡ lb/ft3 16.01846337 kg/m3
pound (avoirdupois) per cubic inch lb/in3 ≡ lb/in3 2.767990471×104
 kg/m3
pound (avoirdupois) per gallon (Imperial) lb/gal ≡ lb/gal 99.77637266 kg/m3
pound (avoirdupois) per gallon (U.S. fluid) lb/gal ≡ lb/gal 119.8264273 kg/m3
slug per cubic foot slug/ft3 ≡ slug/ft3 515.3788184 kg/m3

TimeEdit

Time, t
Name of unit Symbol Definition Relation to SI units
atomic unit of time au a0/(α·c) 2.418 884 254×10−17 s
Callippic cycle   ≡ 441 mo (hollow) + 499 mo (full) = 76 a of 365.25 d = 2.398 3776×109 s
century   ≡ 100 a (see below for definition of year length) = 100 × year
day d = 24 h = 86400 s
day (sidereal) d ≡ Time needed for the Earth to rotate once around its axis, determined from successive transits of a very distant astronomical object across an observer's meridian (International Celestial Reference Frame) 86 164.1 s
decade   ≡ 10 a (see below for definition of year length) = 10 × year
fortnight   ≡ 2 wk = 1 209 600 s
helek   1/1 080 h = 3.3 s
Hipparchic cycle   ≡ 4 Callippic cycles - 1 d = 9.593 424×109 s
hour h ≡ 60 min = 3 600 s
jiffy   ≡ 1/60 s = .016 s
jiffy (alternate)   ≡ 1/100 s = 10 ms
ke (quarter of an hour)   ≡ ¼ h = 1/96 d = 60 × 60 / 4 s = 900 s = 60 / 4 min = 15 min
ke (traditional)   ≡ 1/100 d = 24 × 60 × 60 / 100 s = 864 s = 24 * 60 / 100 min = 14.4 min
lustre; lustrum   ≡ 5 a of 365 d = 1.5768×108 s
Metonic cycle; enneadecaeteris   ≡ 110 mo (hollow) + 125 mo (full) = 6940 d ≈ 19 a = 5.996 16×108 s
millennium   1 000 a (see below for definition of year length) = 1000 × year
milliday md ≡ 1/1 000 d = 24 × 60 × 60 / 1 000 s = 86.4 s
minute min ≡ 60 s = 60 s
moment   ≡ 90 s = 90 s
month (full) mo ≡ 30 d[21] = 2 592 000 s
month (hollow) mo ≡ 29 d[21] = 2 505 600 s
octaeteris   = 48 mo (full) + 48 mo (hollow) + 3 mo (full)[22][23] = 8 a of 365.25 d = 2922 d = 2.524 608×108 s
Planck time   ≡ (G/c5)½ 1.351 211 868×10−43 s
second s time of 9 192 631 770 periods of the radiation corresponding to the transition between the 2 hyperfine levels of the ground state of the caesium 133 atom at 0 K[8] (but other seconds are sometimes used in astronomy) (SI base unit)
shake   ≡ 10−8 s = 10 ns
sigma   ≡ 10−6 s = 1 μs
Sothic cycle   1 461 a of 365 d = 4.607 4096×1010 s
svedberg S ≡ 10−13 s = 100 fs
week wk ≡ 7 d = 604 800 s
year (Gregorian) a, y, or yr = 365.2425 d average, calculated from common years (365 d) plus leap years (366 d) on most years divisible by 4. See leap year for details. = 31 556 952 s
year (Julian) a, y, or yr = 365.25 d average, calculated from common years (365 d) plus one leap year (366 d) every four years = 31 557 600 s
year (sidereal) a, y, or yr ≡ time taken for Sun to return to the same position with respect to the stars of the celestial sphere 365.256 363 d ≈ 31 558 149.7632 s
year (tropical) a, y, or yr ≡ Length of time it takes for the Sun to return to the same position in the cycle of seasons 365.242 190 d ≈ 31 556 925 s
Where UTC is observed, the length of time units longer than 1 s may increase or decrease by 1 s if a leap second occurs during the time interval of interest.

FrequencyEdit

Frequency
Name of unit Symbol Definition Relation to SI units
hertz (SI unit) Hz ≡ Number of cycles per second = 1 Hz = 1/s
revolutions per minute rpm ≡ One unit rpm equals one rotation completed around a fixed axis in one minute of time. 0.104719755 rad/s

Speed or velocityEdit

Speed
Name of unit Symbol Definition Relation to SI units
foot per hour fph ≡ 1 ft/h 8.466 667×10−5 m/s
foot per minute fpm ≡ 1 ft/min = 5.08×10−3 m/s
foot per second fps ≡ 1 ft/s = 3.048×10−1 m/s
furlong per fortnight   ≡ furlong/fortnight 1.663 095×10−4 m/s
inch per minute ipm ≡ 1 in/min 4.23 333×10−4 m/s
inch per second ips ≡ 1 in/s = 2.54×10−2 m/s
kilometre per hour km/h ≡ 1 km/h 2.777 778×10−1 m/s
knot kn ≡ 1 NM/h = 1.852 km/h 0.514 444 m/s
knot (Admiralty) kn ≡ 1 NM (Adm)/h = 1.853 184 km/h[citation needed] = 0.514 773 m/s
mach number M The ratio of the speed of an object moving through a fluid to the speed of sound in the same medium; typically used as a measure of aircraft speed. Unitless. Actual speed of sound varies depending on atmospheric conditions. See "speed of sound" below for one specific condition.
metre per second (SI unit) m/s ≡ 1 m/s = 1 m/s
mile per hour mph ≡ 1 mi/h = 0.447 04 m/s
mile per minute mpm ≡ 1 mi/min = 26.8224 m/s
mile per second mps ≡ 1 mi/s = 1 609.344 m/s
speed of light in vacuum c 299 792 458 m/s = 299 792 458 m/s
speed of sound in air s ≈ 344 m/s at 20 °C, 60% relative humidity [24]

A velocity consists of a speed combined with a direction; the speed part of the velocity takes units of speed.

Flow (volume)Edit

Flow
Name of unit Symbol Definition Relation to SI units
cubic foot per minute CFM ≡ 1 ft3/min = 4.719474432×10−4
 m3/s
cubic foot per second ft3/s ≡ 1 ft3/s = 0.028316846592 m3/s
cubic inch per minute in3/min ≡ 1 in3/min = 2.7311773×10-7 m3/s
cubic inch per second in3/s ≡ 1 in3/s = 1.6387064×10−5
 m3/s
cubic metre per second (SI unit) m3/s ≡ 1 m3/s = 1 m3/s
gallon (U.S. fluid) per day GPD ≡ 1 gal/d = 4.381263638×10-8 m3/s
gallon (U.S. fluid) per hour GPH ≡ 1 gal/h = 1.051503273×10-6 m3/s
gallon (U.S. fluid) per minute GPM ≡ 1 gal/min = 6.30901964×10−5
 m3/s
litre per minute LPM ≡ 1 L/min = 1.6×10-5 m3/s

AccelerationEdit

Acceleration
Name of unit Symbol Definition Relation to SI units
foot per hour per second fph/s ≡ 1 ft/(h·s) 8.466 667×10−5 m/s2
foot per minute per second fpm/s ≡ 1 ft/(min·s) = 5.08×10−3 m/s2
foot per second squared fps2 ≡ 1 ft/s2 = 3.048×10−1 m/s2
gal; galileo Gal ≡ 1 cm/s2 = 10−2 m/s2
inch per minute per second ipm/s ≡ 1 in/(min·s) 4.233 333×10−4 m/s2
inch per second squared ips2 ≡ 1 in/s2 = 2.54×10−2 m/s2
knot per second kn/s ≡ 1 kn/s 5.144 444×10−1 m/s2
metre per second squared (SI unit) m/s2 ≡ 1 m/s2 = 1 m/s2
mile per hour per second mph/s ≡ 1 mi/(h·s) = 4.4704×10−1 m/s2
mile per minute per second mpm/s ≡ 1 mi/(min·s) = 26.8224 m/s2
mile per second squared mps2 ≡ 1 mi/s2 = 1.609 344×103 m/s2
standard gravity g 9.806 65 m/s2 = 9.806 65 m/s2

ForceEdit

Force
Name of unit Symbol Definition Relation to SI units
atomic unit of force ≡ me·α2·c2/a0 8.238 722 06×10−8 N [25]
dyne (cgs unit) dyn ≡ g·cm/s2 = 10−5 N
kilogram-force; kilopond; grave-force kgf; kp; Gf g × 1 kg = 9.806 65 N
kip; kip-force kip; kipf; klbf g × 1 000 lb = 4.448 221 615 2605×103 N
milligrave-force, gravet-force mGf; gf g × 1 g = 9.806 65 mN
newton (SI unit) N A force capable of giving a mass of one kg an acceleration of one meter per second, per second.[26] = 1 N = 1 kg·m/s2
ounce-force ozf g × 1 oz = 0.278 013 850 953 7812 N
pound lb ≡ slug·ft/s2 = 4.448 230 531 N
pound-force lbf g × 1 lb = 4.448 221 615 2605 N
poundal pdl ≡ 1 lb·ft/s2 = 0.138 254 954 376 N
sthene (mts unit) sn ≡ 1 t·m/s2 = 1×103 N
ton-force tnf g × 1 sh tn = 8.896 443 230 521×103 N

See also: Conversion between weight (force) and mass

Pressure or mechanical stressEdit

Pressure
Name of unit Symbol Definition Relation to SI units
atmosphere (standard) atm 101 325 Pa [27]
atmosphere (technical) at ≡ 1 kgf/cm2 = 9.806 65×104 Pa [27]
bar bar ≡ 105 Pa
barye (cgs unit)   ≡ 1 dyn/cm2 = 0.1 Pa
centimetre of mercury cmHg ≡ 13 595.1 kg/m3 × 1 cm × g 1.333 22×103 Pa [27]
centimetre of water (4 °C) cmH2O ≈ 999.972 kg/m3 × 1 cm × g ≈ 98.0638 Pa [27]
foot of mercury (conventional) ftHg 13 595.1 kg/m3 × 1 ft × g 40.636 66×103 Pa [27]
foot of water (39.2 °F) ftH2O ≈ 999.972 kg/m3 × 1 ft × g 2.988 98×103 Pa [27]
inch of mercury (conventional) inHg 13 595.1 kg/m3 × 1 in × g 3.386 389×103 Pa [27]
inch of water (39.2 °F) inH2O ≈ 999.972 kg/m3 × 1 in × g ≈ 249.082 Pa [27]
kilogram-force per square millimetre kgf/mm2 ≡ 1 kgf/mm2 = 9.806 65×106 Pa [27]
kip per square inch ksi ≡ 1 kipf/sq in 6.894 757×106 Pa [27]
micron (micrometre) of mercury \mumHg 13 595.1 kg/m3 × 1 \mum × g ≈ 0.001 torr 0.133 3224 Pa [27]
millimetre of mercury mmHg 13 595.1 kg/m3 × 1 mm × g ≈ 1 torr ≈ 133.3224 Pa [27]
millimetre of water (3.98 °C) mmH2O ≈ 999.972 kg/m3 × 1 mm × g = 0.999 972 kgf/m2 = 9.806 38 Pa
pascal (SI unit) Pa ≡ N/m2 = kg/(m·s2) = 1 Pa [28]
pièze (mts unit) pz 1 000 kg/m·s2 = 1×103 Pa = 1 kPa
pound per square foot psf ≡ 1 lbf/ft2 47.880 25 Pa [27]
pound per square inch psi ≡ 1 lbf/in2 6.894 757×103 Pa [27]
poundal per square foot pdl/sq ft ≡ 1 pdl/sq ft 1.488 164 Pa [27]
short ton per square foot   ≡ 1 sh tn × g / 1 sq ft 95.760 518×103 Pa
torr torr 101 325/760 Pa ≈ 133.3224 Pa [27]

Torque or moment of forceEdit

Torque
Name of unit Symbol Definition Relation to SI units
foot-pound force ft lbf g × 1 lb × 1 ft = 1.355 817 948 331 4004 N·m
foot-poundal ft pdl ≡ 1 lb·ft2/s2 = 4.214 011 009 380 48×10−2 N·m
inch-pound force in lbf g × 1 lb × 1 in = 0.112 984 829 027 6167 N·m
Newton metre (SI unit) N·m ≡ N × m = kg·m2/s2 = 1 N·m

Energy, work, or amount of heatEdit

Energy
Name of unit Symbol Definition Relation to SI units
barrel of oil equivalent bboe ≈ 5.8×106 BTU59 °F ≈ 6.12×109 J
British thermal unit (ISO) BTUISO ≡ 1.0545×103 J = 1.0545×103 J
British thermal unit (International Table) BTUIT = 1.055 055 852 62×103 J
British thermal unit (mean) BTUmean 1.055 87×103 J
British thermal unit (thermochemical) BTUth 1.054 350×103 J
British thermal unit (39 °F) BTU39 °F 1.059 67×103 J
British thermal unit (59 °F) BTU59 °F 1.054 804×103 J = 1.054 804×103 J
British thermal unit (60 °F) BTU60 °F 1.054 68×103 J
British thermal unit (63 °F) BTU63 °F ≈ 1.0546×103 J
calorie (International Table) calIT ≡ 4.1868 J = 4.1868 J
calorie (mean) calmean 4.190 02 J
calorie (thermochemical) calth ≡ 4.184 J = 4.184 J
calorie (3.98 °C) cal3.98 °C ≈ 4.2045 J
calorie (15 °C) cal15 °C ≡ 4.1855 J = 4.1855 J
calorie (20 °C) cal20 °C ≈ 4.1819 J
Celsius heat unit (International Table) CHUIT ≡ 1 BTUIT × 1 K/°R = 1.899 100 534 716×103 J
cubic centimetre of atmosphere; standard cubic centimetre cc atm; scc ≡ 1 atm × 1 cm3 = 0.101 325 J
cubic foot of atmosphere; standard cubic foot cu ft atm; scf ≡ 1 atm × 1 ft3 = 2.869 204 480 9344×103 J
cubic foot of natural gas   1 000 BTUIT = 1.055 055 852 62×106 J
cubic yard of atmosphere; standard cubic yard cu yd atm; scy ≡ 1 atm × 1 yd3 = 77.468 520 985 2288×103 J
electronvolt eV e × 1 V 1.602 177 33×10−19 ± 4.9×10-26 J
erg (cgs unit) erg ≡ 1 g·cm2/s2 = 10−7 J
foot-pound force ft lbf g × 1 lb × 1 ft = 1.355 817 948 331 4004 J
foot-poundal ft pdl ≡ 1 lb·ft2/s2 = 4.214 011 009 380 48×10−2 J
gallon-atmosphere (imperial) imp gal atm ≡ 1 atm × 1 gal (imp) = 460.632 569 25 J
gallon-atmosphere (US) US gal atm ≡ 1 atm × 1 gal (US) = 383.556 849 0138 J
hartree, atomic unit of energy Eh ≡ me·α2·c2 (= 2 Ry) 4.359 744×10−18 J
horsepower-hour hp·h ≡ 1 hp × 1 h = 2.684 519 537 696 172 792×106 J
inch-pound force in lbf g × 1 lb × 1 in = 0.112 984 829 027 6167 J
joule (SI unit) J The work done when a force of one newton moves the point of its application a distance of one meter in the direction of the force.[26] = 1 J = 1 m·N = 1 kg·m2/s2
kilocalorie; large calorie kcal; Cal 1 000 calIT = 4.1868×103 J
kilowatt-hour; Board of Trade Unit kW·h; B.O.T.U. ≡ 1 kW × 1 h = 3.6×106 J
litre-atmosphere l atm; sl ≡ 1 atm × 1 L = 101.325 J
quad   ≡ 1015 BTUIT = 1.055 055 852 62×1018 J
rydberg Ry R··c 2.179 872×10−18 J
therm (E.C.)   100 000 BTUIT = 105.505 585 262×106 J
therm (U.S.)   100 000 BTU59 °F = 105.4804×106 J
thermie th ≡ 1 McalIT = 4.1868×106 J
ton of coal equivalent TCE ≡ 7 Gcalth = 29.3076×109 J
ton of oil equivalent TOE ≡ 10 Gcalth = 41.868×109 J
ton of TNT tTNT ≡ 1 Gcalth = 4.184×109 J

Power or heat flow rateEdit

Power
Name of unit Symbol Definition Relation to SI units
atmosphere-cubic centimetre per minute atm ccm ≡ 1 atm × 1 cm3/min = 1.688 75×10−3 W
atmosphere-cubic centimetre per second atm ccs ≡ 1 atm × 1 cm3/s = 0.101 325 W
atmosphere-cubic foot per hour atm cfh ≡ 1 atm × 1 cu ft/h = 0.797 001 244 704 W
atmosphere-cubic foot per minute atm·cfm ≡ 1 atm × 1 cu ft/min = 47.820 074 682 24 W
atmosphere-cubic foot per second atm cfs ≡ 1 atm × 1 cu ft/s = 2.869 204 480 9344×103 W
BTU (International Table) per hour BTUIT/h ≡ 1 BTUIT/h 0.293 071 W
BTU (International Table) per minute BTUIT/min ≡ 1 BTUIT/min 17.584 264 W
BTU (International Table) per second BTUIT/s ≡ 1 BTUIT/s = 1.055 055 852 62×103 W
calorie (International Table) per second calIT/s ≡ 1 calIT/s = 4.1868 W
foot-pound-force per hour ft lbf/h ≡ 1 ft lbf/h 3.766 161×10−4 W
foot-pound-force per minute ft lbf/min ≡ 1 ft lbf/min = 2.259 696 580 552 334×10−2 W
foot-pound-force per second ft lbf/s ≡ 1 ft lbf/s = 1.355 817 948 331 4004 W
horsepower (boiler) bhp ≈ 34.5 lb/h × 970.3 BTUIT/lb 9.810 657×103 W
horsepower (European electrical) hp ≡ 75 kp·m/s = 736 W
horsepower (Imperial electrical) hp ≡ 746 W = 746 W
horsepower (Imperial mechanical) hp ≡ 550 ft lbf/s = 745.699 871 582 270 22 W
horsepower (metric) hp ≡ 75 m kgf/s = 735.498 75 W
litre-atmosphere per minute L·atm/min ≡ 1 atm × 1 L/min = 1.688 75 W
litre-atmosphere per second L·atm/s ≡ 1 atm × 1 L/s = 101.325 W
lusec lusec ≡ 1 L·µmHg/s [14] ≈ 1.333×10−4 W
poncelet p ≡ 100 m kgf/s = 980.665 W
square foot equivalent direct radiation sq ft EDR ≡ 240 BTUIT/h 70.337 057 W
ton of air conditioning   ≡ 1 t ice melted / 24 h 3 504 W
ton of refrigeration (Imperial)   ≡ 1 BTUIT × 1 lng tn/lb ÷ 10 min/s 3.938 875×103 W
ton of refrigeration (IT)   ≡ 1 BTUIT × 1 sh tn/lb ÷ 10 min/s 3.516 853×103 W
watt (SI unit) W The power which in one second of time gives rise to one joule of energy.[26] = 1 W = 1 J/s = 1 N·m/s = 1 kg·m2/s3

ActionEdit

Action
Name of unit Symbol Definition Relation to SI units
atomic unit of action au = /2π 1.054 571 68×10−34 J·s[29]

Dynamic viscosityEdit

Dynamic viscosity
Name of unit Symbol Definition Relation to SI units
pascal second (SI unit) Pa·s ≡ N·s/m2 , kg/(m·s) = 1 Pa·s
poise (cgs unit) P ≡ 10−1 Pa·s = 0.1 Pa·s
pound per foot hour lb/(ft·h) ≡ 1 lb/(ft·h) 4.133 789×10-4 Pa·s
pound per foot second lb/(ft·s) ≡ 1 lb/(ft·s) 1.488164 Pa·s
pound-force second per square foot lbf·s/ft2 ≡ 1 lbf·s/ft2 47.88026 Pa·s
pound-force second per square inch lbf·s/in2 ≡ 1 lbf·s/in2 6,894.757 Pa·s

Kinematic viscosityEdit

Kinematic viscosity
Name of unit Symbol Definition Relation to SI units
square foot per second ft2/s ≡ 1 ft2/s = 0.09290304 m2/s
square metre per second (SI unit) m2/s ≡ 1 m2/s = 1 m2/s
stokes (cgs unit) St ≡ 10−4 m2/s = 10−4 m2/s

Electric currentEdit

Electric current
Name of unit Symbol Definition Relation to SI units
ampere (SI base unit) A ≡ The constant current needed to produce a force of 2 ×10-7 newton per metre between two straight parallel conductors of infinite length and negligible circular cross-section placed one metre apart in a vacuum.[8] = 1 A
electromagnetic unit; abampere (cgs unit) abamp ≡ 10 A = 10 A
esu per second; statampere (cgs unit) esu/s ≡ (0.1 A·m/s) / c 3.335641×10−10
 A

Electric chargeEdit

Electric charge
Name of unit Symbol Definition Relation to SI units
abcoulomb; electromagnetic unit (cgs unit) abC; emu ≡ 10 C = 10 C
atomic unit of charge au e 1.602 176 462×10−19 C
coulomb (SI unit) C ≡ The amount of electricity carried in one second of time by one ampere of current.[26] = 1 C = 1 A·s
faraday F ≡ 1 mol × NA·e 96 485.3383 C
statcoulomb; franklin; electrostatic unit (cgs unit) statC; Fr; esu ≡ (0.1 A·m) / c 3.335 641×10−10 C

Electric dipoleEdit

Electric dipole
Name of unit Symbol Definition Relation to SI units
atomic unit of electric dipole moment ea0   8.478 352 81×10-30 C·m[30]

Electromotive force, electric potential differenceEdit

Voltage, electromotive force
Name of unit Symbol Definition Relation to SI units
abvolt (cgs unit) abV ≡ 1×10-8 V = 1×10-8 V
statvolt (cgs unit) statV c· (1 μJ/A·m) = 299.792 458 V
volt (SI unit) V The difference in electric potential across two points along a conducting wire carrying one ampere of constant current when the power dissipated between the points equals one watt.[26] = 1 V = 1 W/A = 1 kg·m2/(A·s3)

Electrical resistanceEdit

Electrical resistance
Name of unit Symbol Definition Relation to SI units
ohm (SI unit) Ω The resistance between two points in a conductor when one volt of electric potential difference, applied to these points, produces one ampere of current in the conductor.[26] = 1 Ω = 1 V/A = 1 kg·m2/(A2·s3)

CapacitanceEdit

Capacitor's ability to store charge
Name of unit Symbol Definition Relation to SI units
farad (SI unit) F The capacitance between two parallel plates that results in one volt of potential difference when charged by one coulomb of electricity.[26] = 1 F = 1 C/V = 1 A2·s4/(kg·m2)

Magnetic fluxEdit

magnetic flux
Name of unit Symbol Definition Relation to SI units
maxwell (CGS unit) Mx ≡ 10−8 Wb[31] = 1×10-8 Wb
weber (SI unit) Wb Magnetic flux which, linking a circuit of one turn, would produce in it an electromotive force of 1 volt if it were reduced to zero at a uniform rate in 1 second.[26] = 1 Wb = 1 V·s = 1 kg·m2/(A·s2)

Magnetic flux densityEdit

Magnetic flux density
Name of unit Symbol Definition Relation to SI units
gauss (CGS unit) G Mx/cm2 = 10−4 T = 1×10-4 T [32]
tesla (SI unit) T Wb/m2 = 1 T = 1 Wb/m2 = 1 kg/(A·s2)

InductanceEdit

Inductance
Name of unit Symbol Definition Relation to SI units
henry (SI unit) H The inductance of a closed circuit that produces one volt of electromotive force when the current in the circuit varies at a uniform rate of one ampere per second.[26] = 1 H = 1 Wb/A = 1 kg·m2/(A·s)2

TemperatureEdit

Temperature
Name of unit Symbol Definition Conversion to kelvin
degree Celsius °C °C = K − 273.15. A unit of °C is the same size as a unit of K; however, their numerical values differ as the zero point of Celsius is set at 273.15 K (the ice point).[8] [K] = [°C] + 273.15
degree Delisle °De [K] = 373.15 − [°De] × 2/3
degree Fahrenheit °F 0 °F ≡ freezing pt. of H2O+NaCl, 180°F between freezing and boiling pt of H2O @ 1atm [K] = ([°F] + 459.67) × 5/9
degree Newton °N [K] = [°N] × 100/33 + 273.15
degree Rankine °R; °Ra 0 °R ≡ absolute zero [K] = [°R] × 5/9
degree Réaumur °Ré [K] = [°Ré] × 5/4 + 273.15
degree Rømer °Rø [K] = ([°Rø] − 7.5) × 40/21 + 273.15
kelvin (SI base unit) K ≡ 1/273.16 of the thermodynamic temperature of the triple point of water.[8] 1 K

Information entropyEdit

Information entropy
Name of unit Symbol Definition Relation to SI units Relation to bits
SI unit J/K ≡ J/K = 1 J/K
nat; nip; nepit nat kB = 1.380 650 5(23)×10-23 J/K
bit; shannon bit; b; Sh ≡ ln(2) × kB = 9.569 940 (16)×10-24 J/K = 1 bit
ban; hartley ban; Hart ≡ ln(10) × kB = 3.179 065 3(53)×10-23 J/K
nibble ≡ 4 bits = 3.827 976 0(64)×10-23 J/K = 22 bit
byte B ≡ 8 bits = 7.655 952 (13)×10-23 J/K = 23 bit
kilobyte (decimal) kB 1 000 B = 7.655 952 (13)×10-20 J/K
kilobyte (kibibyte) KB; KiB 1 024 B = 7.839 695 (13)×10-20 J/K = 210 bit

Often, information entropy is measured in shannons, whereas the (discrete) storage space of digital devices is measured in bits. Thus, uncompressed redundant data occupy more than one bit of storage per shannon of information entropy. The multiples of a bit listed above are usually used with this meaning. Other times the bit is used as a measure of information entropy and is thus a synonym of shannon.

Luminous intensityEdit

The candela is the preferred nomenclature for the SI unit.

Luminous intensity
Name of unit Symbol Definition Relation to SI units
candela (SI base unit); candle cd The luminous intensity, in a given direction, of a source that emits monochromatic radiation of frequency 540×1012 hertz and that has a radiant intensity in that direction of 1/683 watt per steradian.[8] = 1 cd
candlepower (new) cp ≡ cd The use of candlepower as a unit is discouraged due to its ambiguity. = 1 cd
candlepower (old, pre-1948) cp Varies and is poorly reproducible.[33] Approximately 0.981 cd.[14] ≈ 0.981 cd

LuminanceEdit

Luminance
Name of unit Symbol Definition Relation to SI units
candela per square foot cd/ft2 ≡ cd/ft2 10.763910417 cd/m2
candela per square inch cd/in2 ≡ cd/in2 1,550.0031 cd/m2
candela per square metre (SI unit); nit (deprecated[14]) cd/m2 ≡ cd/m2 = 1 cd/m2
footlambert fL ≡ (1/π) cd/ft2 3.4262590996 cd/m2
lambert L ≡ (104/π) cd/m2 3,183.0988618 cd/m2
stilb (CGS unit) sb ≡ 104 cd/m2 ≈ 1×104 cd/m2

Luminous fluxEdit

Luminous flux
Name of unit Symbol Definition Relation to SI units
lumen (SI unit) lm ≡ cd·sr = 1 lm = 1 cd·sr

IlluminanceEdit

Illuminance
Name of unit Symbol Definition Relation to SI units
footcandle; lumen per square foot fc ≡ lm/ft2 = 10.763910417 lx
lumen per square inch lm/in2 ≡ lm/in2 1,550.0031 lx
lux (SI unit) lx ≡ lm/m2 = 1 lx = 1 lm/m2
phot (CGS unit) ph ≡ lm/cm2 = 1×104 lx
For details on radiation, see wikipedia:Conversion of units#Radiation - source activity.

Software tools Edit

Home and office computers come with converters in bundled spreadsheet applications or can access free converters via the Internet. Units and measurements can be easily converted using these tools, but only if the units are explicitly defined and the conversion is compatible (e.g., cmHg to kPa).

Free conversion softwareEdit

General commercial sources of convertersEdit

See also Edit

ReferencesEdit

based on the wikipedia page (This page is used to help explain terminology used in Tractor Wikis main article pages) as part of the Glossary Index of terms.

For Updated version (post 1st September 2009), see Wikipedia:Conversion of Units.
  1. United States Naval Observatory. (2009). Selected Astronomical Constants, 2009. Accessed May 10, 2009
  2. "NIST Reference on Constants, Units, and Uncertainty."(2006). National Institute of Standards and Technology. Accessed February 22, 2008.
  3. 3.00 3.01 3.02 3.03 3.04 3.05 3.06 3.07 3.08 3.09 3.10 3.11 3.12 3.13 3.14 Lide, D. (Ed.). (1990). Handbook of Chemistry and Physics (71st ed). Boca Raton, FL: CRC Press. Section 1.
  4. National Bureau of Standards. (June 30, 1959). Refinement of values for the yard and the pound. Federal Register, viewed September 20, 2006 at National Geodetic Survey web site.
  5. National Institute of Standards and Technology General Tables of Units of Measurement
  6. The International Astronomical Union and Astronomical Units
  7. Klein, Herbert Arthur. (1988). The Science of Measurement: a Historical Survey. Mineola, NY: Dover Publications 0-4862-5839-4.
  8. 8.0 8.1 8.2 8.3 8.4 8.5 8.6
  9. International System of Units, 8th ed. (2006), Bureau International des Poids et Mesures, Section 4.1 Table 8.
  10. P. Kenneth Seidelmann, Ed. (1992). Explanatory Supplement to the Astronomical Almanac. Sausalito, CA: University Science Books. p. 716 and s.v. parsec in Glossary.
  11. 11.0 11.1 11.2 Whitelaw, Ian. (2007). A Measure of All Things: The Story of Man and Measurement. New York: Macmillan 0-312-37026-1. p. 152.
  12. 12.0 12.1 De Vinne, Theodore Low (1900). The practice of typography: a treatise on the processes of type-making, the point system, the names, sizes, styles and prices of plain printing types 2nd ed. New York: The Century Co. p. 142–150.
  13. Pasko, Wesley Washington (1894). American dictionary of printing and bookmaking. (1894). New York: Howard Lockwood. p. 521.
  14. 14.0 14.1 14.2 14.3 14.4 14.5
  15. National Bureau of Standards. (June 30, 1959). Refinement of values for the yard and the pound. Federal Register, viewed September 20, 2006 at National Geodetic Survey web site.
  16. Thompson, A. and Taylor, B.N. (2008). Guide for the Use of the International System of Units (SI). National Institute of Standards and Technology Special Publication 811. p. 57.
  17. 17.0 17.1 17.2 17.3 17.4
  18. Barry N. Taylor, Ed.,NIST Special Publication 330: The International System of Units (SI) (2001 Edition), Washington: U.S. Government Printing Office, 43,"The 12th Conference Generale des Poids et Mesures (CGPM)…declares that the word “litre” may be employed as a special name for the cubic decimetre".
  19. CODATA Value: atomic uint of mass. (2006). National Institute of Standards and Technology. Retrieved 16 September 2008.
  20. The Swiss Federal Office for Metrology gives Zentner on a German language web page[1] and quintal on the English translation of that page[2]; the unit is marked "spécifiquement suisse !"
  21. 21.0 21.1 Pedersen O. (1983). "Glossary" in Coyne, G., Hoskin, M., and Pedersen, O. Gregorian Reform of the Calendar: Proceedings of the Vatican Conference to Commemorate its 400th Anniversary. Vatican Observatory. Available from Astrophysics Data System.
  22. Richards, E.G. (1998). Mapping Time. Oxford University Press, 94-95. ISBN 0-19-850413-6. 
  23. Steel, Duncan (2000). Marking Time. John Wiley & Sons, 46. ISBN 0-471-29827-1. 
  24. Lide, 1990, p. 14-35.
  25. CODATA Value: atomic unit of force. (2006). National Institute of Standards and Technology. Retrieved September 14, 2008.
  26. 26.0 26.1 26.2 26.3 26.4 26.5 26.6 26.7 26.8
  27. 27.00 27.01 27.02 27.03 27.04 27.05 27.06 27.07 27.08 27.09 27.10 27.11 27.12 27.13 27.14 27.15 Barry N. Taylor, (April 1995), Guide for the Use of the International System of Units (SI) (NIST Special Publication 811), Washington, DC: U.S. Government Printing Office, pp. 57–68.
  28. Barry N. Taylor, (April 1995), Guide for the Use of the International System of Units (SI) (NIST Special Publication 811), Washington, DC: U.S. Government Printing Office, p. 5.
  29. International System of Units, 8th ed. (2006), Bureau International des Poids et Mesures, Section 4.1 Table 7.
  30. Standard for the Use of the International System of Units (SI): The Modern Metric System IEEE/ASTM SI 10-1997. (1997). New York and West Conshohocken, PA: Institute of Electrical and Electronics Engineers and American Society for Testing and Materials. Tables A.1 through A.5.

External links Edit

</div>



Smallwikipedialogo This page uses some content from Wikipedia. The original article was at Conversion of units. The list of authors can be seen in the page history. As with Tractor & Construction Plant Wiki, the text of Wikipedia is available under the Creative Commons by Attribution License and/or GNU Free Documentation License. Please check page history for when the original article was copied to Wikia

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.