Tractor & Construction Plant Wiki
Register
Advertisement
Plymouth Belvedere
Plymouth Belvedere Wagon (Auto classique Bellepros Vaudreuil-Dorion '11)
A 1964 Plymouth Belvedere Wagon photographed in Quebec, Canada, in July 2011.
Manufacturer Chrysler Corporation
Production 1954–1970
Assembly Highland Park, Michigan
Detroit, Michigan (Lynch Road)
Predecessor Plymouth Cranbrook
Successor Plymouth Satellite
Class Full-size (1954–1964)
Mid-size (1965–1970)
Layout FR layout

The Plymouth Belvedere is an American automobile model which was produced by Plymouth from 1954 to 1970.

1951–1953 Plymouth Cranbrook Belvedere

Plymouth Cranbrook Belvedere
Model year(s) 1951-1953
Class Full-size car
Body style(s) 2-door hardtop [1]
Engine(s) 218 cu in (3.6 L) I6
Wheelbase 114.0 in (2,896 mm)

Introduced on March 31, the 1951 Plymouth Cranbrook Belvedere arrived as a two-door pillarless hardtop. It was Plymouth's first vehicle of such design and was built in response to Chevrolet's Bel Air. That vehicle, the first two-door hardtop in the low-priced American market, was introduced in 1950 and ended that model year with great success.

The Cranbook Belvedere was not a separate model. Rather, it was the specific name only used for the two-door hardtop version of the Cranbrook. Being built on that car's 118.5 in (3,010 mm) wheelbase gave the two-door Belvedere very favorable proportions. Powering the Belvedere was the familiar flathead straight-6 engine. Displacement was 217.8 in3 (3.6 L), the compression ratio was a relatively low 7.00:1, and output was 97 hp (72 kW) (SAE gross). First-year prices started at US$2,114.

For 1952, Plymouth kept the Cranbrook Belvedere largely unchanged. The biggest alteration was to the color scheme; to further distinguish the top-level Belvedere from other Plymouths, the two toning now flowed from the roof over the beltline onto the trunk, which has been referred to as the "saddleback" treatment. Two Tone color schemes were Sable Bronze over Suede, Black over Mint Green, and Gray over Blue. Overdrive was made available as optional equipment in the 1952 Plymouth. In overdrive, the engine made three revolutions for each rear wheel revolution against four without overdrive. The engine was a complete carry over from 1951. Prices, however, did increase by about US$100 to $2,216. Production for 1951 and 1952 totalled 51,266 units, which was slightly better than a quarter of Chevrolet Bel Air and Ford Victoria production for that same period. There has never been a separate breakout for Plymouth production figures for the Korean War era years of 1951–52.

The Belvedere remained a part of the Cranbrook series through 1953. For that year, all Plymouth models were completely restyled. Major style changes included a shorter 114 in (2,900 mm) wheelbase, a one-piece windshield, flush rear fenders, and a lower hood line. In April 1953, Plymouths received the Hy-Drive semi-automatic transmission. Again, Plymouth was behind the competition with Chevrolet having introduced the fully automatic Powerglide transmission in 1950, with Ford following the next year with its fully automatic Ford-O-Matic transmission. The engine was carried over from 1952 with the only enhancement being a slight increase in the compression ratio to 7.10:1, which yielded a rating of 100 hp (75 kW). The shorter wheelbase partly led to an overall stubby appearance that was panned by consumers and critics. Even with a reduced starting price of US$2,132, demand was rather low. A total of 35,185 1953 Belevederes were sold.

1954

First generation
Plymouth Belvedere Wasen
Model year(s) 1954
Class Full-size car
Body style(s) 4-door sedan [2]
2-door hardtop [2]
2-door convertible [2]
2-door station wagon [2]
Engine(s) 218 cu in (3.6 L) I6
Wheelbase 114.0 in (2,896 mm)

The Belvedere replaced the Cranbrook as the top-line offering for 1954. Now, a separate model instead of just a two-door hardtop coupe, a buyer could choose a convertible, two-door station wagon, four-door sedan or the aforementioned two-door hardtop, now called the Sport Coupe. Slight styling updates adorned the carry-over body design. For the first time, small chrome tailfins appeared on the rear fenders. In March 1954, Plymouth finally offered a fully automatic transmission, the Chrysler Corporation's well-regarded PowerFlite 2-speed. Also new was a larger standard engine: a 230.2 in3 six-cylinder borrowed from the Dodge Division. Power was now rated at 110 hp (82 kW). Belvedere production slipped to 32,492 for the year.

1954-Plymouth-Belvedere-4dr-Sed

1954 Plymouth Belvedere 4-door sedan

1955–1956

Second generation
1955-Plymouth-Belvedere-4dr-Sed
Model year(s) 1955–1956
Body style(s) 2-door sedan [3]
4-door sedan [3]
2-door hardtop coupe [3]
4-door hardtop [3]
2-door convertible [3]
4-door station wagon [3]
Engine(s) 230.2 cu in (3.8 L) I6
241 cu in (3.9 L) V8
260 cu in (4.3 L) V8
273 cu in (4.5 L) V8
318 cu in (5.2 L) V8
340 cu in (5.6 L) V8
350 cu in (5.7 L) "Golden Commando" twin 4-barrel V8
Transmission(s) 2-speed automatic
Wheelbase 115.0 in (2,921 mm)

All Plymouths were treated to a major overhaul for the 1955 model year. This was the first year of Chrysler Stylist Virgil Exner's "Forward Look." The Belvedere returned as top-of-the-line.

For 1956, Plymouth styling evolved from that of the 1955s. Most notable would be the introduction of the first push-button automatic transmission to appear in an American automobile, and a more dramatic rear-end treatment highlighted by a pair of rakish tail-fins. In early 1956, the Fury joined the Belvedere line as a special-edition high-performance model. In 1956, Plymouth added seat belts.[4]

After the Fury was expanded to become Plymouth's top model in 1956, the Belvedere was demoted as the middle priced model after the Plaza and Savoy.[citation needed]

In 1956, Chrysler in a public relations campaign took a Belvedere and had turbine engine fitted instead of the standard gasoline engine, and was driven across the US.[5]

1957–1959

Third generation
Plymouth1000
Model year(s) 1957–1959
Body style(s) 2-door sedan [6]
4-door sedan [6]
2-door hardtop [6]
4-door hardtop [6]
2-door convertible [6]
2-door station wagon [6]
4-door station wagon [6]
Engine(s) 230.2 cu in (3.8 L) I6
241 cu in (3.9 L) V8
260 cu in (4.3 L) V8
273 cu in (4.5 L) V8
318 cu in (5.2 L) V8
340 cu in (5.6 L) V8
350 cu in (5.7 L) "Golden Commando" twin 4-barrel V8
Transmission(s) 2-speed automatic
Wheelbase station wagon: 122.0 in (3,099 mm)
all other: 118.0 in (2,997 mm)

1957 would be a banner year for the Chrysler Corporation, and Plymouth was no exception. Plymouth's design was so revolutionary that Chrysler used the slogan "Suddenly, it's 1960!" to promote the new car. The Belvedere line once again included the Fury. This year a new 318 in3 V8 with dual four-barrel carburetors was the standard engine in the Fury, and it was available on all Plymouths.

The Belvedere would once again return as a top level trim for 1958. Styling was evolutionary from the sleek 1957 models. Quad headlights were new, as was a big block 350 in3 V8 with dual four-barrel carburetors dubbed "Golden Commando" optional on all models.

The convertible was only available in the Belvedere model between 1956 and 1958.

1960–1961

Fourth generation
1960 Plymouth Belvedere Sedan - Flickr - Sicnag
Model year(s) 1960–1961
Body style(s) 2-door sedan [7]
4-door sedan [7]
2-door hardtop [7]
4-door station wagon [7]
Engine(s) 230.2 cu in (3.8 L) I6
241 cu in (3.9 L) V8
260 cu in (4.3 L) V8
273 cu in (4.5 L) V8
318 cu in (5.2 L) V8
340 cu in (5.6 L) V8
350 cu in (5.7 L) "Golden Commando" twin 4-barrel V8
Transmission(s) 2-speed automatic
Wheelbase 118.0 in (2,997 mm)

Starting in 1960, Belvederes got a brand-new standard inline six-cylinder engine. Colloquially known as the slant-6, it displaced 225 cu in (3.69 l), featured overhead valves, and a block that was inclined 30 degrees to the right to permit a lower hood line with maximum displacement. This engine used a single-barrel Holley carburetor, and became known for its extremely rugged construction, exceptional reliability and longevity. In 1961, "most beholders would agree...it was hit with the ugly stick."[8]

1962–1964

Fifth generation
'62 Plymouth Belvedere Sedan (Orange Julep)
Model year(s) 1962–1964
Body style(s) 2-door sedan [9]
4-door sedan [9]
2-door hardtop coupe [9]
4-door station wagon [9]
Platform B-body
Engine(s) 225 cu in (3.7 L) I6
383 cu in (6.3 L) V8
'63 Plymouth Belvedere Coupe (Byward Auto Classic)

1963 Plymouth Belvedere coupe

Starting with the 1962 model year, all full-size Plymouths were "downsized", with more compact outside dimensions. American car buyers at the time were in the thought mode of "Bigger is Better", and sales of these models suffered. However, the big block V8-engined (426) Belvederes proved to be a terror on the track, and became a desirable drag race car due to its lightweight body.

The 1963 and 1964 models used the same unibody platform as the '62s, but were restyled to look longer and wider.

The 1964 Belvedere (and corresponding Fury hardtop coupes) featured a new "slant-back" roofline that proved to be popular, and sales improved significantly over '62 and '63.

The 1964 Belvedere is also notable for being the car used to introduce the 426 Chrysler Hemi engine, which used a canted large-valve arrangement. This was such a significant high-RPM breathing improvement that Hemi-equipped Plymouth Belvederes won 1st, 2nd, and 3rd at NASCAR's 1964 Daytona race. One of the winning drivers was the famous Richard Petty.[10]

1965–1967

Sixth generation
'66 Plymouth Belvedere Sedan (Centropolis Laval '10)
Model year(s) 1965–1967
Body style(s) 2-door sedan [11]
4-door sedan [11]
2-door hardtop [11]
2-door convertible
4-door station wagon [11]
Platform B-body
Engine(s) 273 cu in (4.5 L) V8
383 cu in (6.3 L) V8
318 cu in (5.2 L) V8
340 cu in (5.6 L) V8
360 cu in (5.9 L) V8
426 cu in (7.0 L) Hemi V8
Transmission(s) 3-speed manual
2-speed automatic

In 1965 Plymouth once again made the Fury a full-size car, and Belvedere became the intermediate size offering.[12] The 1968 television show Adam-12 featured a 1967 model black and white Belvedere as the standard Los Angeles police cruiser.


1968–1970

Seventh generation
Model year(s) 1968–1970
Body style(s) 2-door coupe [13]
4-door sedan [13]
4-door station wagon [13]
Platform B-body
Engine(s) 273 cu in (4.5 L) V8
383 cu in (6.3 L) V8
318 cu in (5.2 L) V8
340 cu in (5.6 L) V8
360 cu in (5.9 L) V8
426 cu in (7.0 L) Hemi V8
Wheelbase 116.0 in (2,946 mm)
Length 202.7 in (5,149 mm)
Width 76.4 in (1,941 mm)
Height 54.7 in (1,389 mm)

The Plymouth GTX was introduced as the top of the line Belvedere, and Richard Petty won the Grand National championship in NASCAR in a Belvedere. The new LA-style lightweight 318 engine was introduced for this year and would remain available on the Belvedere through its life.

In 1968, the line was restyled with a roofline changed to follow the Charger, standard flip-out rear quarter windows (that would also be used in 1969), and "Coke bottle styling".

The Belvedere name was dropped at the end of the 1970 model year, replaced by the Plymouth Satellite name originally reserved for higher-end Belvederes. The Satellite itself lasted only through 1974; starting in 1975, the car was renamed Plymouth Fury, and the longer-wheelbase Plymouth Fury became the Gran Fury.

Engines

(Note: there are some discrepancies in this section referring to the term "Hemi". 340 engines were not Hemis and the Hemi was first put into production and performance use as early as 1951, not in the late 60's as the last paragraph suggests. For more info on the Hemi see Chrysler Hemi engine.)

Old style 277-301-303-318 "A" engines

These engines were manufactured from 1955 to 1966, and the newer "LA" engines were introduced in 1967 running all the way till 1992. These engines have led to a lot of confusion with the inclusion of the 273-318, 340-360 "LA" engines also referred to as "A" engines. The old style "A" engine was introduced as a 277 ci engine (also referred to as Polyspheres due to the polyspherical cylinder head combustion chamber) with 187 hp (139 kW) as standard. The 301/318 engines were introduced in 1957. The 318 2-barrel carb (1957–1966) had 230 hp (170 kW), while the 318 4-barrel (1958–62) had 260 hp (190 kW). In the '57, there was a 4-barrel 318 performance package that had 290 hp (220 kW), being the largest output for stock "A" engines. As with the vintage the Polysphere was not the choice for hotrodders because the lack of support for performance parts such as headers, cams, intake manifolds, and cylinder heads that were widely available for the 318 "LA" (1967–1991) and the 340/360 engines. And hence the confusion where old car enthusiasts refer to the 1967 as being the "A" style, which is incorrect if you look at Chrysler's engine history.

New style 273/318/340/360 "LA" engines (commonly referred as "A" but is not correct)

The 273 was introduced midyear in 1964 with a 2-barrel 180 hp, 1965 saw a 4-barrel 235 hp (175 kW) with performance camshaft, 1966 saw a limited production of the 273 with dual exhaust, steel headers, a 700-cfm Holley carb, and a 0.500" lift performance camshaft making 275 hp (205 kW); installation was only in 50 specially equipped Dodge Darts designed specifically for NHRA D-stock drag racing, the car was tagged "D-Dart". In 1967, the new style 318 was introduced with a 2-barrel carb and was not meant to be a performance engine. This engine was a bigbore version of the 273 and used the latest lightweight casting technology found in the 273. A 318 4-barrel version was introduced in 1978 after a period of 10 years of having the 318 ship with a 2-barrel. The 318LA was replaced after 1991 with the introduction of the 1992 5.2 L Magnum (SMPI).

The 340 was introduced in 1968 and began to build what was one of the most popular and best small block V8 engines. The 340 had high-flow cylinder heads and a 180°, 2-level intake manifold. The 340 reached its highest stock performance peak in 1970 with a three two-barrel carburetor package and featured a thick web block, specially machined cylinder heads, adjustable rocker arms, and special intake manifold and carbs. In 1972, the 340 was bumped down in compression from 10.4:1 to an emissions friendly 8.5:1 and shortly thereafter we had the 1973 oil crisis.

The 360 was introduced in 1971 with a 2-barrel carb and a 9:1 compression ratio. After the 340 was discontinued in 1973, many of the 340 parts were installed on the newer 360 and continued with the 340's performance heritage; with the discontinuance of the B and RB engines after 1978, the 360 E58 became the highest output Chrysler VB8 for 1979 and 1980.

Australian production

1958 Plymouth Belvedere 4door Hardtop

Chrysler Australia produced a right hand drive version of the 1958 Plymouth Belvedere 4-door Hardtop

The Plymouth Belvedere was also produced by Chrysler Australia. The first model, based on the 1953 US Plymouth, featured a high level of Australian content, with body panels pressed in Chrysler Australia's Keswick facility in South Australia and matched with a 217.8 cubic inch (4107cc) side-valve six-cylinder engine, imported from Chrysler UK.[14] It was produced as a four-door sedan [14] and as a locally developed 2-door coupe utility,[15] along with similar Cranbrook and Savoy models, until replaced by the Chrysler Royal in 1957.[14] The Belvedere was reintroduced to the Australian market in early 1958 when Chrysler Australia began assembling the current model Belvedere 4-door Hardtop which was imported from the US in knocked-down form.[16] The 1959 model was equipped with 318 cubic inch V8 engine and push-button automatic transmission.[17] Chrysler Australia replaced their Plymouth Belvedere, Dodge Custom Royal and De Soto Firesweep models with the Dodge Phoenix in 1960.[18]

Oklahoma Centennial

Main article: Miss Belvedere

During Oklahoma's 50th anniversary, a new 1957 Plymouth Belvedere was sealed in a concrete enclosure as a time capsule near downtown Tulsa. It was unearthed June 14, 2007[19] during the state's centennial celebrations, and was publicly unveiled on June 15. In line with the Cold War realities of late 1950s America, the concrete enclosure was advertised as having been built to withstand a nuclear attack.[20] The concrete enclosure, however, was not airtight and allowed water to leak in, which caused significant damage to the vehicle.[21]

The controversial[22] televised vehicle customizer Boyd Coddington would have been the first to start the unburied car, had it been operable.

The car was the prize of a 1957 contest to guess the population of Tulsa in the year 2007. The winning entrant, one Raymond Humbertson, guessed 384,743 vs. the actual figure of 382,457. However, Mr. Humbertson died in 1979 and now only distant relatives remain.[23]

A second such car, this one a brand-new Plymouth Prowler, was encased in an above-ground vault in 1998 to celebrate the city's centennial. It will be revealed after the same period of time as the Belvedere in the year 2048.

UK examples

A few examples can be seen in the UK at classic car shows

Sources

  1. John Gunnell, Standard Catalog of American Cars 1946-1975, Revised 4th Edition, pages 646-649
  2. 2.0 2.1 2.2 2.3 John Gunnell, Standard Catalog of American Cars 1946-1975, Revised 4th Edition, page 650
  3. 3.0 3.1 3.2 3.3 3.4 3.5 John Gunnell, Standard Catalog of American Cars 1946-1975, Revised 4th Edition, page 650-653
  4. "Directory Index: Plymouth/1956 Plymouth/album". Oldcarbrochures.com. Retrieved on 2011-11-20.
  5. "We Drove A Turbine Car Coast-To-Coast." Popular Mechanics, June 1956, pp. 72-76/252.
  6. 6.0 6.1 6.2 6.3 6.4 6.5 6.6 John Gunnell, Standard Catalog of American Cars 1946-1975, Revised 4th Edition, pages 653-655
  7. 7.0 7.1 7.2 7.3 John Gunnell, Standard Catalog of American Cars 1946-1975, Revised 4th Edition, pages 656-659
  8. Flory, J. "Kelly", Jr. American Cars 1960–1972 (Jefferson, NC: McFarland & Coy, 2004), p.123.
  9. 9.0 9.1 9.2 9.3 John Gunnell, Standard Catalog of American Cars 1946-1975, Revised 4th Edition, pages 660-665
  10. "Which came first, the Plymouth or the Petty?", Allpar, http://allpar.com/racing/petty-plymouth-racing.html. Retrieved on . 
  11. 11.0 11.1 11.2 11.3 John Gunnell, Standard Catalog of American Cars 1946-1975, Revised 4th Edition, pages 665-671
  12. "1965, 1966, 1967 Plymouth Belvedere/Satellite and GTX". HowStuffWorks. Retrieved on 2011-04-20.
  13. 13.0 13.1 13.2 John Gunnell, Standard Catalog of American Cars 1946-1975, Revised 4th Edition, pages 671-678
  14. 14.0 14.1 14.2 David Brimble, Chryslers before the Chrysler Royal, Restored Cars, No 87 (July / August 1991), pages 14-15
  15. Larry O'Toole, The Good Old Aussie Ute, page 192
  16. Gavin Farmer, Great Ideas in Motion, 2010, page 74
  17. News Review, Three Chryslers, Australian Motor Sports, August 1959
  18. Gavin Farmer, Great Ideas in Motion, 2010, page 77
  19. http://www.unburiedcar.com
  20. CNN: link broke.
  21. By World staff. "Buried Belvedere vault full of water". TulsaWorld. Archived from the original on 2013-02-04. Retrieved on 2011-11-20.
  22. "Updated: Belvedere rusty but still has personality". TulsaWorld (2007-06-15). Archived from the original on 2007-08-11. Retrieved on 2011-11-20.
  23. "Miss Belvedere, you have a winner: But Raymond Humbertson died in 1979". TulsaWorld (2007-06-23). Retrieved on 2011-11-20.

External links

Commons-logo
Wikimedia Commons has media related to:
Advertisement