auto
 

Rumely Oil Pull

From Tractor & Construction Plant Wiki

Rumely Oil Pull's were a line of tractors built by the Advance-Rumely Thresher company of LaPorte, Indian in the USA. The company introduced its first tractor in 1908 after employing engineer John Secor to work on the engine design for them.[1]

A restored Rumely Model W of 1929 t the Stoke Goldington Steam Rally 2009
A Model H 16-30 of 1917 at Newby Hall Vintage Gathering 2009

The 1st Rumely "OilPull" tractor was tested in 1909 and the machine became known as Kerosene Annie due to its ability to burn this fuel. The tractor survives to the present day in a museum in ?. Tractor production began in properly in 1910 and "Kerosene Annie" became the Rumely Model B 25-45 tractor. The engine featured a special carburettor designed by John Secor and W.H. Higgings that injected water to help control the combustion process. The Model B featured a two cylinder horizontal engine design, with the characteristic cooling tower using oil (not water as other makes do). the engine being a 9.5 inch bore by 12 inch stroke.

The year 1911 saw two new "heavyweight" models appear:

  • The twin-cylinder Model E 30-60
  • the smaller single-cylinder Model F 15-30 (later re-rated as an 18-35).

Towards the end of the decade, these were joined by the smaller Models G, H and K, which were similar but scaled-down versions of the Model E and used a heavy steel girder frame design like the Model E. About 1919, Rumely added a motor plough design to it product range - known as the "All Purpose", this was somewhat less successful than the Rumely conventional tractors range.

The 1920s saw the channel frame replaced by a pressed steel chassis to reduce weight in a completely redesigned range of Rumely tractors. These "lightweight" Rumelys ranged in size from the little Model L 15-25 to the rather larger Model S 30-60. These models were updated slightly and given new model letter designations over the next few years.

Towards the end of the 1920s, Rumely purchased the Toro Motor Co. of Minneapolis, and sold the Toro tractor as the Rumely "Do-All" - the tractor was available as a standard four-wheeled machine or as a convertible motor cultivator. In 1930, Rumely followed other manufacturers in introducing a conventional tractor, the Rumely 6A, with an in-line six-cylinder engine, front-mounted radiator and bonnet. In the Advance-Rumely Co. was purchased by Allis-Chalmers, who continued to sell the Rumely 6A for several years more befor it was replaced with their own designs.

Contents

[edit] Model range

[edit] Preservation

A number of the Rumely tractors survive in the USA & Canada. The odd example has been imported into the UK and they occasional show up at Working events and other shows with tractor displays.

The following have been reported[2] present at UK shows;

Template:PML Rumely OilPull

[edit] See also

(is your club missing ? Add it to the list)

[edit] References / sources

[edit] External links


Template:Rumely OilPull range Template:Steel wheel tractors

Rate this article: